Place log onto the rear support stand. Ensure that the log is no longer than 4M and 250mm diameter. If the log is 4M long, then 1.5M of the log should be on the left hand side of the saw horse so that it is balanced, as shown below.
The log must be balanced before cutting. All size capacities may vary depending on the weight of the log.
The rear support stand teeth should be embedded into the log.
Secure the log by placing the ratchet strap over it and through the slot within the ratchet. Pull the strap tight and lock the ratchet, ensuring the cogs are locked.
All users must ensure the saw horse is on firm level ground.